Sony CDX-F7700 Operating Instructions - Page 23
Setting the equalizer (EQ7 - xplod
View all Sony CDX-F7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Sound • EQ7 Tune (page 24) - to adjust the equalizer curve. • HPF (High pass filter) - to select the cut-off frequency to "78Hz," "125Hz" or "off." • LPF (Low pass filter) - to select the cut-off frequency to "78Hz," "125Hz" or "off." • Loudness - to enjoy bass and treble even at low volumes. The bass and treble will be reinforced. • AUX Level (page 26) - to adjust the volume level of connected auxiliary equipment. Receive Mode • Local on/off (Local seek mode) (page 17) - Select "on" to only tune into stations with stronger signals. • Mono on/off (Monaural mode) (page 17) - Select "on" to hear FM stereo broadcast in monaural. - Select "off" to return to normal mode. • IF Auto/Wide (page 17) 1 Press (MENU). 2 Press M or m repeatedly until the desired item appears. 3 Press < or , to select the desired setting (Example: "on" or "off"). 4 Press (ENTER). After the mode setting is complete, the display returns to normal play mode. Note The displayed item will differ depending on the source. Tip You can easily switch among categories by pressing M or m for 2 seconds. Setting the equalizer (EQ7) You can select an equalizer curve for 7 music types (Xplod, VOCAL, CLUB, JAZZ, NEWAGE, ROCK, CUSTOM), and OFF (equalizer off). You can store and adjust the equalizer settings for frequency and level. You can store the EQ7 setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a desired source. 2 Press (EQ7) repeatedly to select a desired equalizer curve. Each time you press (EQ7), the item changes. To cancel the equalizing effect, select "OFF." After 3 seconds, the display returns to the normal play mode. continue to next page t 23