Sony CDX GT310 Instruction Manual - Page 7
AF Alternative Frequencies/TA, Traffic Announcement button - receiver
UPC - 027242699779
View all Sony CDX GT310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
K SEEK -/+ buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). L Receptor for the card remote commander M MODE button 8, 12 To select the radio band (FM/MW/LW); select the unit*2. N DSPL (display)/DIM (dimmer) button 8, 9 To change display items (press); change the display brightness (press and hold). O RESET button (located behind the front panel) 4 P Number buttons CD/MD*1: (1)/(2): ALBM -/+*3*4 To skip albums (press); skip albums continuously (press and hold). (3): REP 8 (4): SHUF 8 (6): PAUSE*5 To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). Q AF (Alternative Frequencies)/TA (Traffic Announcement) button 9 To set AF and TA in RDS. The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4). qk buttons To control CD/radio, the same as (SEEK) -/+ on the unit. ql VOL (volume) +/- button To adjust volume. w; ATT (attenuate) button To attenuate the sound. To cancel, press again. wa SEL (select) button The same as the select button on the unit. ws M (+)/m (-) buttons To control CD, the same as (1)/(2) (ALBM -/+) on the unit. wd SCRL (scroll) button 8 To scroll the display item. wf Number buttons To receive stored stations (press); store stations (press and hold). *1 When an MD changer is connected. *2 When a CD/MD changer is connected. *3 When an MP3/WMA is played. *4 If the changer is connected, the operation is different, see page 13. *5 When playing back on this unit. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see "Replacing the lithium battery of the card remote commander" on page 15. 7