Sony CDX-GT360MP Operating Instructions - Page 12

Adjusting setup items 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.* 4 Press (BACK). * For CLOCK-ADJ and BTM settings, step 4 is not necessary. The following items can be set depending on the source and setting: CLOCK-ADJ (Clock Adjust) (page 5) CT (Clock Time) Activates the CT function: "ON," "OFF" (page 9). BEEP Activates the beep sound: "ON," "OFF." CAUT ALM*1 (Caution Alarm) Activates the caution alarm: "ON," "OFF" (page 5). AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 13). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." REAR/SUB*1 Switches the audio output: "REAROUT" (power amplifier), "SUB-OUT" (subwoofer). DEMO (Demonstration) Activates the demonstration: "ON," "OFF." 12 DIMMER Changes the display brightness: "ON," "OFF." M.DISPLAY (Motion Display) CDX-GT360MP - "SA": to show moving patterns and spectrum analyzer. - "OFF": to deactivate the Motion Display. CDX-GT260MP - "ON": to show moving patterns. - "OFF": to deactivate the Motion Display. AUTO SCR (Auto Scroll) Scrolls long items automatically: "ON," "OFF." LPF*2 (Low Pass Filter) Selects the subwoofer cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." SW PHASE*2 (Subwoofer Phase) Selects the subwoofer phase: "SUB NORM," "SUB REV." HPF (High Pass Filter) Selects the front/rear speaker cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LOUDNESS Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." PARENTAL*3 Sets the parental lock to "ON" or "OFF," and edits the passcode (page 13). BTM (page 8) *1 When the unit is turned off. *2 When the audio output is set to "SUB-OUT." *3 When the SiriusXM tuner is connected.