Sony CDX-GT40U Operating Instructions (CDX-GT40U) - Page 21

Error displays/Messages - model

Get Sony CDX-GT40U PDF manuals and user guides View all Sony CDX-GT40U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

The USB device takes longer to play back.  The USB device contains files with a complicated tree structure. The sound is intermittent.  The sound may be intermittent at a high-bit- rate of more than 320 kbps. Error displays/Messages CHECKING  The unit is confirming the connection of a USB device. - Wait until confirming the connection is finished. ERROR  The disc is dirty or inserted upside down. - Clean or insert the disc correctly.  A blank disc has been inserted.  The disc cannot play due to a problem. - Insert another disc.  USB device was not automatically recognized. - Reconnect it again.  Press  to remove the disc. FAILURE  The connection of speakers/amplifiers is incorrect. - See the installation/connections manual of this model to check the connection. HUB NO SUPRT (Hubs Not Supported)  USB hub is not supported on this unit. NO DEV (No Device)  USB is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. - Be sure to connect a USB device and USB cable. NO MUSIC  The disc or USB device does not contain a music file. - Insert a music CD in this unit. - Connect a USB device with a music file in it. NO NAME  A disc/album/artist/track name is not written in the track. OFFSET  There may be an internal malfunction. - Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. OVERLOAD  USB device is overloaded. - Disconnect the USB device, then change the source by pressing - Indicates that the USB device is out of order, or an unsupported device is connected. READ  The unit is reading all track and album information on the disc. - Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. USB NO SUPRT (USB Not Supported)  The connected USB device is not supported. - For details on the compatibility of your USB device, visit the support site. " " or " "  During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further. ""  The character cannot be displayed with the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
21
The USB device takes longer to play back.
The USB device contains files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Error displays/Messages
CHECKING
The unit is confirming the connection of a
USB device.
–
Wait until confirming the connection is
finished.
ERROR
The disc is dirty or inserted upside down.
–
Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
–
Insert another disc.
USB device was not automatically recognized.
–
Reconnect it again.
Press
to remove the disc.
FAILURE
The connection of speakers/amplifiers is
incorrect.
–
See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT
(Hubs Not Supported)
USB hub is not supported on this unit.
NO DEV
(No Device)
USB is selected as source without a USB device
connected. A USB device or a USB cable has
been disconnected during playback.
–
Be sure to connect a USB device and USB
cable.
NO MUSIC
The disc or USB device does not contain a
music file.
–
Insert a music CD in this unit.
–
Connect a USB device with a music file in it.
NO NAME
A disc/album/artist/track name is not written
in the track.
OFFSET
There may be an internal malfunction.
–
Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
USB device is overloaded.
–
Disconnect the USB device, then change the
source by pressing

.
–
Indicates that the USB device is out of order,
or an unsupported device is connected.
READ
The unit is reading all track and album
information on the disc.
–
Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT
(USB Not Supported)
The connected USB device is not supported.
–
For details on the compatibility of your USB
device, visit the support site.
“
” or “
”
During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
“
”
The character cannot be displayed with the
unit.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.