Sony CDX GT420U Operating Instructions - Page 19

A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Error displays/Messages CHECKING The unit is confirming the connection of a USB device. t Wait until confirming the connection is finished. ERROR • The disc is dirty or inserted upside down. t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. t Insert another disc. • USB device was not automatically recognized. t Reconnect it again. • Press Z to remove the disc. FAILURE The connection of speakers/amplifiers is incorrect. t See the installation/connections manual of this model to check the connection. HUB NO SUPRT USB HUB is not supported on this unit. L. SEEK +/- The local seek mode is on during automatic tuning. NO DEV (No Device) (SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. NO INFO Text information is not written in the MP3/WMA/ AAC file. NO MUSIC The disc/USB device does not contain a music file. t Insert a music CD in this unit. t Connect a USB device with a music file in it. NO NAME A disc/album/track name is not written in the track. NO TRACK The selected item in the USB device does not contain an album/track. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. OVERLOAD USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE). t Indicates that the USB device is out of order, or an unsupported device is connected. READ The unit is reading all track and album information on the disc/USB device. t Wait until reading is complete and playback starts automatically. Depending on the disc/USB device structure, it may take more than a minute. RESET The CD unit cannot be operated due to a problem. t Press the RESET button (page 4). USB NO SUPRT (USB Not Support) The connected USB device is not supported. t Connect a USB device of Mass Storage Class (page 14). " " or " " During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further. "" The character cannot be displayed with the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.sony.com/xplod 19