Sony CDX GT52W Operating Instructions - Page 4
Welcome !, Getting Started, Resetting the unit, Preparing the card remote commander, Setting the clock - installation
UPC - 027242718593
View all Sony CDX GT52W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Welcome ! Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. • CD playback You can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 13)). Type of discs Label on the disc Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen. CD-DA MP3 WMA AAC • Radio reception - You can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2). - BTM (Best Tuning Memory): The unit selects strong signal stations and stores them. • Sound adjustment - EQ3 stage2: You can choose any one of 7 preset equalizer curves. - DSO (Dynamic Soundstage Organizer): creates a more ambient sound field, using virtual speaker synthesis, to enhance the sound of speakers, even if they are installed low in the door. • Optional device operation You can also control optional device, such as CD/MD changers, etc. • Auxiliary equipment connection An AUX input jack on the front of the unit allows connection of a portable audio device. 4 RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. Preparing the card remote commander Before using the card remote commander for the first time, remove the insulation film. Tip For how to replace the battery, see "Replacing the lithium battery of the card remote commander" on page 14. Setting the clock The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until "CLOCK-ADJ" appears. 3 Press (SEEK) +. The hour indication flashes. 4 Rotate the volume control dial to set the hour and minute. To move the digital indication, press (SEEK) -/+. 5 Press the select button. The setup is complete and the clock starts. To display the clock, press (DSPL). Press (DSPL) again to return to the previous display.