Sony CDX GT920U Operating Instructions - Page 25

Error*2 • The disc is dirty or inserted upside down.*1 t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play because of some problem. t Insert another disc. • USB device was not automatically recognized. t Reconnect it again. • Press Z to remove the disc. Failure The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. Hubs Not Supported USB HUB is not supported on this unit. Load The changer is loading the disc. t Wait until loading is complete. Local Seek +/- The local seek mode is on during automatic tuning. NO Album Name An album name is not written in the track. NO Artist Name An artist name is not written in the track. NO Device (SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. NO Disc The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO Disc Name A disc/album/group/track name is not written in the track. NO ID3 Tag*3 ID3 tag information is not written in the MP3 file. NO Magazine The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO Music The disc/USB device does not contain a music file. t Insert a music CD in this unit or MP3 playable changer. t Connect a USB device with a music file in it. NO Track The selected item in the USB device does not contain an album/track. NO Track Name A track name is not written in the track. Not Read The disc information has not been read by the unit. t Load the disc, then select it on the list. Not Ready The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. Not Supported The connected USB device is not supported. t Connect a USB device of Mass Storage Class (page 20). Offset There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. Overload USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE). t Indicates that the USB device is out of order, or an unsupported device is connected. Push Reset The CD unit and CD/MD changer cannot be operated because of some problem. t Press the RESET button (page 4). Read The unit is reading all track and album/group information on the disc/USB device. t Wait until reading is complete and playback starts automatically. Depending on the disc/USB device structure, it may take more than a minute. " " or " " During fast-forward or reverse, you have reached the beginning or the end of the disc and you cannot go any further. "" The character cannot be displayed with the unit. *1 The disc number of the disc causing the error appears in the display. *2 If an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display. *3 When a CD changer is connected. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.sony.com/xplod 25