Sony CDXM10 Operating Instructions - Page 18

CD playback The disc cannot be loaded. • Another disc is already loaded. • The disc has been forcibly inserted upside down or in the wrong way. The disc does not playback. • Defective or dirty disc. • The CD-Rs/CD-RWs are not for audio use (page 14). MP3/WMA files cannot be played back. The disc is incompatible with the MP3/WMA format and version (page 15). MP3/WMA files take longer to play back than others. The following discs take a longer time to start playback. - a disc recorded with a complicated tree structure. - a disc recorded in Multi Session. - a disc to which data can be added. The display items do not scroll. • For discs with very many characters, those may not scroll. • "A.SCRL" is set to "OFF". t Set "A.SCRL-ON" (page 12). t Press and hold (DSPL) (SCRL). The sound skips. • Installation is not correct. t Install the unit at an angle of less than 45° in a sturdy part of the boat. • Defective or dirty disc. The disc will not eject. Press Z (eject) (page 6). Radio reception The stations cannot be received. The sound is hampered by noises. • Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a boat's antenna (aerial) booster (only when your boat has built-in antenna (aerial) in the rear/side glass). • Check the connection of the boat antenna (aerial). • The auto antenna (aerial) will not go up. t Check the connection of the power antenna (aerial) control lead. • Check the frequency. Preset tuning is not possible. • Store the correct frequency in the memory. • The broadcast signal is too weak. Automatic tuning is not possible. • Setting of the local seek mode is not correct. t Tuning stops too frequently: Set "LOCAL-ON" (page 12). t Tuning does not stop at a station: Set "MONO-ON" (page 12). • The broadcast signal is too weak. t Perform manual tuning. During FM reception, the "ST" indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. t Set "MONO-ON" (page 12). An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Set "MONO-OFF" (page 12). RDS (CDX-MR10) The SEEK starts after a few seconds of listening. The station is non-TP or has weak signal. t Deactivate TA (page 10). No traffic announcements. • Activate TA (page 10). • The station does not broadcast any traffic announcements despite being TP. t Tune in another station. PTY displays The current station is not an RDS station. • RDS data has not been received. • The station does not specify the program type. Error displays/Messages ERROR • The disc is dirty or inserted upside down. t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. t Insert another disc. FAILURE The connection of speakers/amplifiers is incorrect. t See the installation/connections manual of this model to check the connection. L. SEEK +/- The local seek mode is on during automatic tuning. NO AF (CDX-MR10 only) There is no alternative frequency for the current station. t Press (SEEK) -/+ while the program service name is flashing. The unit starts searching for another frequency with the same PI (Program Identification) data ("PI SEEK" appears). NO INFO Text information is not written in the MP3/WMA file. NO MUSIC The disc does not contain a music file. t Insert a music CD in this unit NO NAME A disc/track name is not written in the track. NO TP (CDX-MR10 only) The unit will continue searching for available TP stations. 18