Sony CFD-575 Operating Instructions - Page 12

Basic Operations 3 Deck B Deck B Deck A Start recording. To record from the CD player and the radio, press r on deck B (( is depressed automatically). To record from the tape, press r on deck B (( is depressed automatically), and then press ( on deck A. (For high speed dubbing, press HI-SPEED DUBBING instead.) Tips • Adjusting the volume or the audio emphasis (see page 27) will not affect the recording level. • If the AM program makes a whistling sound after you've pressed r in step 3, set the ISS (Interference Suppress Switch) at the rear to the position that most decreases the noise. Normally set the switch to "2". • For the best results, use the AC power as a power source and use TYPE I(normal) tape for recording. • To erase a recording, proceed as follows: 1 Disconnect the microphone if connected to the MIX MIC jack. 2 Press TAPE until "TAPE" appears in the display window. 3 Press r . Use these buttons for additional operations POWER p6 P To Stop recording Pause recording Turn on/off the player Press p6 on deck B P on deck B Press the button again to resume recording. POWER Basic Operations 11