Sony CFD-575 Operating Instructions - Page 35

Specifications

Page 35 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channel driven from 150 - 15,000 Hz; rated 3.5 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Other Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20,000 Hz +0/-1 dB Wow and flutter Below measurable limit Radio section Frequency range FM: 87.6 - 108 MHz AM: 530 - 1,710 kHz Aerials FM: Telescopic aerial AM: Built-in ferrite bar aerial Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 120 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 12,000 Hz General Speaker Full range: 12 cm (4 3⁄4 in.) dia., 3.2 ohms, cone type (2) Tweeter: 2 cm (13⁄16 in.) dia. (2) Inputs Mixing microphone input jack (minijack): Sensitivity 2.45 mV For low impedance microphone Outputs Headphones jack (stereo minijack) For 16 - 68 ohms impedance headphones Power output (excluding US model) 4.3 W + 4.3 W (at 3.2 ohm, 10 % harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60 Hz 12 V DC, 8 size D (R20) batteries For memory back-up: 6 V DC, 4 size AA (R6) batteries For remote: 3 V DC, 2 size AA (R6) batteries Power consumption AC 28 W Battery life For CD radio cassette-corder: FM recording Sony R20P: approx. 11 h Sony alkaline LR20: approx. 16 h Tape playback Sony R20P: approx. 6 h Sony alkaline LR20: approx. 10 h CD playback Sony R20P: approx. 4 h Sony alkaline LR20: approx. 6 h Dimensions Approx. 653 × 267 × 207 mm (w/h/d) (25 3⁄4 × 10 5⁄8 × 8 1⁄4 inches) (incl. projecting parts) Mass Approx. 11.3 kg (24 lb. 15 oz) (incl. batteries) Supplied accessory AC power cord (1) Remote controller (1) Design and specifications are subject to change without notice. Optional accessories Sony MDR headphone series 34 Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Additional Information
34
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channel driven
from 150 - 15,000 Hz; rated 3.5 W per
channel-minimum RMS power, with no more
than 10 % total harmonic distortion in AC
operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 μW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +0/-1 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,710 kHz
Aerials
FM: Telescopic aerial
AM: Built-in ferrite bar aerial
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 12,000 Hz
General
Speaker
Full range: 12 cm (4
3
4
in.) dia.,
3.2 ohms, cone type (2)
Tweeter: 2 cm (
13
16
in.) dia. (2)
Inputs
Mixing microphone input jack (minijack):
Sensitivity 2.45 mV
For low impedance microphone
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones
Power output (excluding US model)
4.3 W + 4.3 W (at 3.2 ohm, 10 % harmonic
distortion)
Power requirements
For CD radio cassette-corder:
120 V AC, 60 Hz
12 V DC, 8 size D (R20) batteries
For memory back-up:
6 V DC, 4 size AA (R6) batteries
For remote:
3 V DC, 2 size AA (R6) batteries
Power consumption
AC 28 W
Battery life
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 11 h
Sony alkaline LR20: approx. 16 h
Tape playback
Sony R20P: approx. 6 h
Sony alkaline LR20: approx. 10 h
CD playback
Sony R20P: approx. 4 h
Sony alkaline LR20: approx. 6 h
Dimensions
Approx. 653
×
267
×
207 mm
(w/h/d)
(25
3
4
×
10
5
8
×
8
1
4
inches)
(incl. projecting parts)
Mass
Approx. 11.3 kg (24 lb. 15 oz) (incl. batteries)
Supplied accessory
AC power cord (1)
Remote controller (1)
Design and specifications are subject to change without
notice.
Optional accessories
Sony MDR headphone series