Sony CFD-ZW165 Operating Instructions (primary manual) - Page 28

Troubleshooting (continued) Tape Player Symptom Remedy The tape does not move when you press an operation button. The REC r button does not function/The tape does not play. • Close the cassette compartment securely. • Make sure the safety tab on the cassette is in place. • Make sure "TAPE" appears in the display. The tape does not erase completely. • Clean the erasing head (see page 29.) • Replace all the batteries with new ones if they are weak. The tape does not record. • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place. The audio is weak/The audio quality is poor. • Clean the heads, pinch rollers and capstans (See page 29). • Demagnetize the heads using a demagnetizer (see page 29). The sound is distorted. The timer does not operate. • The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. • Make sure the time on the clock is correct. • Check to see if the AC power had been cut off. • Make sure the t (clock) indication is displayed. The remote does not function. • Replace all the batteries in the remote with new ones if they are weak. • Make sure that you are pointing the remote at the remote sensor on the player. • Remove any obstacles in the path of the remote and the player. • Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. • Move closer to the player when using the remote. Timer (CFD-ZW160/ZW200 only) Remote After trying the above remedies, if the player still does not function properly, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. 28 Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6