Sony CMT-GP5 Operating Instructions - Page 14

Waking up to music - Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 5). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 7). • TAPE: Load a tape. • TUNER: Tune in a radio station (see "Listening to the radio" on page 9). 2 Press CLOCK/TIMER SET. 3 Press ./> repeatedly until "PLAY" appears, then press CLOCK/ TIMER SET. "ON TIME" appears and the hour indication flashes. 4 Set the time to start playback. Press ./> repeatedly to set the hour, then press CLOCK/TIMER SET. The minute indication flashes. Press ./> repeatedly to set the minute, then press CLOCK/TIMER SET. 5 Set the time to stop playback following the same procedure as step 4. 6 Press ./> repeatedly depending on the sound source you want to play. Each time you press the button, the display changes cyclically as follows: CD t TAPE t TUNER 7 Adjust the volume. 8 Press CLOCK/TIMER SET. 9 Press ?/1 to turn off the system. Other operations To Change the setting Activate the timer Cancel the timer Do this Start over from step 1. Press CLOCK/TIMER SELECT repeatedly until "PLAY" appears, then press CLOCK/TIMER SET. Press CLOCK/TIMER SELECT repeatedly until "OFF" appears, then press CLOCK/TIMER SET. Notes • If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated. • You cannot use the optional component connected to MD IN jacks as sound sources for the Daily Timer. 14GB