Sony CMT-GP5 Operating Instructions - Page 8

Other operations To Do this Cancel Program Play Press PLAY MODE/ DIRECTION in stop mode repeatedly until both "PGM" and "SHUF" disappear. Add a track to the Perform steps 1 - 4 in stop mode. end of the program Erase the program Press CLEAR on the remote in stop mode. Each time you press the button, a track is cleared from the end of the program. Tip The program you made remains after Program Play finishes. To play the same program again, press CD N on the remote (or CD NX on the unit). However, the program is cleared when you open the disc tray. Tuner Presetting radio stations You can preset up to 32 stations for FM and AM. You can then tune in any of those stations simply by selecting the corresponding preset number. Automatic tuning preset You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations. 1 Press TUNER BAND repeatedly to select FM or AM. 2 Press and hold TUNING +/- until the frequency indication starts to change, then release it. Scanning stops automatically when a station is tuned in. At that time, "TUNED" and "STEREO" (for stereo program only) appear. If "TUNED" does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 through 4 of "Manual tuning preset" (page 9). 3 Press TUNER MEMORY on the remote. The preset number flashes. Station storage starts with preset number 1. If preset stations have been erased, then stations are stored to the lowest preset number containing no station. Preset number Frequency 4 Repeat steps 1 through 3 to preset other stations. 8GB