Sony CMT-HPX9 Operating Instructions - Page 27

Troubleshooting Play does not start. • Eject the disc and check whether a disc is loaded. • Wipe the disc clean (page 30). • Replace the disc. • Load the disc that this system can play (page 5). • Load the disc correctly. • Load the disc with the label side up. • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. • Press N (or CD/NX on the unit) to start play. Disc access takes a long time. • Set "CD POWER" and "ON" by the CD power manage function (page 15). The sound skips. • Wipe the disc clean (page 30). • Replace the disc. • Try moving the system to a place without vibration (e.g., on top of a stable stand). • Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE repeatedly until both "PGM" and "SHUF" disappear to return to Normal Play. MP3 audio track cannot be played back. • Recording was not performed according to the ISO 9660 Level 1 or Level 2 format, or Joliet in the expansion format. • The MP3 audio track does not have the extension ".MP3". • The data is not stored in MP3 format. • Discs containing tracks other than MPEG1, 2 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to play back than others. • After the system reads all tracks on the discs, playback may take more time than usual if: - the number of albums or tracks on the disc is very large. - the album and track organization structure is very complex. The album title, track title and ID3 tag do not appear correctly. • Use a disc that conforms with ISO 9660 Level 1, level 2, or Joliet in the expansion format. You inserted an 8 cm disc in the DISC 1-5 slots. • Unplug the power cord. Lift the main unit and remove the disc from underneath the tray. (However, do not lift the tray during this procedure.) Plug in the power cord once more. Tuner Severe hum or noise/stations cannot be received. • Set the proper band and frequency (page 14). • Connect the antenna properly (page 7). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Keep the antennas away from the system and other components. • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. • Try turning off surrounding electrical equipment. • Set "CD POWER" and "OFF" by the CD power manage function (page 15). A stereo FM program cannot be received in stereo. • Press FM MODE until "MONO" disappears in the display. Tape deck The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them (page 31). • The record/playback heads are magnetized. Demagnetize them (page 31). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (page 31). There is excessive wow or flutter, or the sound drops out. • The capstans in the tape deck are dirty. Clean them using a cleaning cassette (page 31). continued 27GB