Sony CMT-NEZ3 Operating Instructions - Page 19

Timer recording radio programs, - Rec Timer

Page 19 highlights

Timer Timer recording radio programs - Rec Timer You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. 1 Tune in the preset radio station (see "Listening to a preset station" on page 13). 2 Press CLOCK/TIMER SET. "PLAY" appears. 3 Press . or > repeatedly to select "REC", then press ENTER. "ON TIME" appears and the hour indication flashes. 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. Rec Timer settings and the desired station appear, then the original display returns. 6 Load a recordable tape. 7 Press ?/1 to turn off the system. Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "REC" appears, then press ENTER. Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "OFF" appears, then press ENTER. Notes • If you use the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated. • The volume is reduced to minimum during recording. • You cannot activate the Play Timer and the Rec Timer at the same time. • After you have set Rec Timer, do not operate the system until the recording ends. • The Rec Timer is canceled automatically after the Rec Timer has been activated. 19GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Timer
19
GB
You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 12) and set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 13).
2
Press CLOCK/TIMER SET.
“PLAY” appears.
3
Press
.
or
>
repeatedly to select
“REC”, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
4
Set the time to start recording.
Press
.
or
>
repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press
.
or
>
repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
Rec Timer settings and the desired station
appear, then the original display returns.
6
Load a recordable tape.
7
Press
?/1
to turn off the system.
Other operations
Notes
If you use the Rec Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
If the system is on about 15 seconds before the preset
time, the Rec Timer will not be activated.
The volume is reduced to minimum during
recording.
You cannot activate the Play Timer and the Rec
Timer at the same time.
After you have set Rec Timer, do not operate the
system until the recording ends.
The Rec Timer is canceled automatically after the
Rec Timer has been activated.
Timer recording radio
programs
— Rec Timer
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “REC”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “OFF”
appears, then press ENTER.