Sony CMT-NEZ3 Operating Instructions - Page 28
CD player Tape deck Tuner CMT-NEZ3 - stereo
View all Sony CMT-NEZ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CMT-NEZ3 North-American model: Continuous RMS power output (reference): 10 + 10 W (6 ohms at 1 kHz, 10% THD) European model: DIN power output (rated): 11 + 11 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 15 + 15 W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 28 + 28 W Other models: The following measured at AC 120, 220 or 240 V, 50/60 Hz DIN power output (rated): 11 + 11 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 15 + 15 W (6 ohms at 1 kHz, 10% THD) Inputs AUDIO IN: Outputs PHONES: SPEAKER: Sensitivity 250 mV, impedance 47 kilohms Accepts headphones with an impedance of 8 ohms or more Accepts impedance of 6 to 16 ohms. CD player section Laser Diode Properties Frequency response Emission duration: continuous Laser Output: Less than 44.6 µW (This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture) 20 Hz - 20 kHz Tape deck section Recording system 4-track 2-channel, stereo Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz FM lead antenna 75 ohms unbalanced 10.7 MHz 28GB AM tuner section Tuning range Pan-American model: 530 - 1,710 kHz (with the tuning interval set at 10 kHz) 531 - 1,710 kHz (with the tuning interval set at 9 kHz) European and Saudi Arabian models: 531 - 1,602 kHz (with the tuning interval set at 9 kHz) Other models: 530 - 1,710 kHz (with the tuning interval set at 10 kHz) 531 - 1,602 kHz (with the tuning interval set at 9 kHz) Antenna AM loop antenna, external antenna terminal Intermediate frequency 450 kHz Speaker CMT-NEZ5 Speaker system Speaker units Woofer: Tweeter: Nominal impedance Dimensions (w/h/d) Mass 2-way, bass-reflex type 10 cm dia., cone type 4 cm dia., cone type 6 ohms Approx. 145 × 235 × 175 mm Approx. 1.9 kg net per speaker CMT-NEZ3 Speaker system Speaker units Woofer: North American model: Other models: Nominal impedance Dimensions (w/h/d) Mass North American model: Other models: Full Range Speaker System 8 cm dia., cone type 10 cm dia., cone type 6 ohms Approx. 145 × 235 × 155 mm Approx. 1.4 kg net per speaker Approx. 1.5 kg net per speaker