Sony CPD-101VS Operating Instructions (primary manual) - Page 39
diagnosis, function
View all Sony CPD-101VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
A fine horizontal line (wire) is visible 4 This wire stabilizes the vertically striped Aperture Grille (page 16). This Aperture Grille allows more light to pass through to the screen giving the Trinitron CRT more color and brightness. Hum is heard right after the power is turned on 4 When the power is turned on, the Auto-degauss cycle is activated. While the Auto-degauss cycle is activated, a hum may be heard. The same hum is heard when the display is manually degaussed. This is not a malfunction. • If the problem persists, call your authorized Sony dealer from a location near you, or call Sony Technical Support at 1-888-4SONYPC (1-888-476-6972). • Note the model name and the serial number of your display. Also note the make and name of your computer and video board. Self-diagnosis function This display is equipped with a self-diagnosis function. Use this function if there is a problem with your display or computer. 1. Disconnect the video input cable or turn off the connected computer. 2. Turn the display off and on. 3. Press and hold the button for more than 2 seconds. If all four color bars appear (white, red, green, blue) after a few seconds, the display is working properly, but there might be a problem with your computer. Contact your computer's manufacturer. If the color bars do not appear, there might be a problem with the display. Contact your local authorized Sony dealer, or call Sony Technical Support at 1-888-4SONYPC (1-888-476-6972). SonyOline http://www.world.sony.com/ Printed on recycled paper Sony Corporation Printed in Japan