Sony D-EJ01 Primary User Manual - Page 19

Using dry batteries, to EXT BATT, DC IN 4.5 V, Connecting a power source, With the, side up, Continued

Page 19 highlights

To remove the rechargeable batteries Remove the batteries as illustrated below. When to charge the rechargeable batteries When the batteries become weak, "Lo batt" appears in the display with the beep sound. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. Using dry batteries Make sure to use the supplied battery case. Use only the following dry battery type for your CD player: • LR6 (size AA) alkaline batteries 1 Remove the cap of the battery case, and insert two LR6 (size AA) alkaline batteries by matching the 3 to the diagram outside the battery case and close the cap of the battery case. 2 Connect the battery case to the CD player. to EXT BATT/ DC IN 4.5 V With the v side up (Continued) Connecting a power source 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

19
To remove the rechargeable batteries
Remove the batteries as illustrated below.
When to charge the rechargeable
batteries
When the batteries become weak, “Lo batt”
appears in the display with the beep sound.
To keep the original battery capacity for a
long time, charge the batteries only when
they are completely depleted.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about
half, replace the batteries with new
rechargeable batteries.
Note on the rechargeable batteries
If the battery is new or has not been used for
a long time, it may not be charged
completely until you charge and discharge it
several times.
Using dry batteries
Make sure to use the supplied battery case.
Use only the following dry battery type for
your CD player:
LR6 (size AA) alkaline batteries
1
Remove the cap of the battery
case, and insert two LR6 (size AA)
alkaline batteries by matching the
3
to the diagram outside the
battery case and close the cap of
the battery case.
2
Connect the battery case to the
CD player.
to EXT BATT/
DC IN 4.5 V
Connecting a power source
With the
v
side up
(Continued)