Sony DAV-C700 Operating Instructions - Page 70
the Virtual Multi Dimension sound, SIDE LOW, SIDE HIGH: Specify
View all Sony DAV-C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
• REAR - BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the "Virtual Multi Dimension" sound field (page 50) properly. - NONE: Select this if no rear speaker is used. • SUBWOOFER - YES Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings of other speakers, the subwoofer may output excessive sound. Specifying the rear speaker position and height If you select anything other than "NONE" in "REAR," specify the position and height of the rear speakers. The default setting is underlined. BEHIND (LOW) Select this if the rear speakers are located in section B and D. BEHIND (HIGH) Select this if the rear speakers are located in section B and C. SIDE (LOW) Select this if the rear speakers are located in section A and D. SIDE (HIGH) Select this if the rear speakers are located in section A and C. These parameters are not available when "REAR" is set to "NONE." Position diagram A B 90 A 45 B 20 Height diagram C C 60 D D 30 xDISTANCE The default distance setting for the speakers in relation to the listening position is shown below. 5m (17ft) 5m (17ft) 5m (17ft) 3.4m (12ft) 3.4m (12ft) Be sure to change the value in the Setup Display when you move the speakers. The default adjustments are in parentheses. 70