Sony DAV-FX100W DAVFX100W Instructions (entire component system) - Page 23
Attach the wall-mount pads on the rear side of the speaker., Hang the speakers on the screws.
View all Sony DAV-FX100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started 4 Attach the wall-mount pads on the rear side of the speaker. Wall-mount pads (7 × 7 mm, 3 mm thick) (9/32 × 9/32 inch, 1/8 inch thick) 5 Hang the speakers on the screws. 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the speaker Note • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 23US