Sony DAV-FX500 Operating Instructions - Page 77
Custom Settings, CUSTOM SETUP]
View all Sony DAV-FX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Custom Settings [CUSTOM SETUP] Use this to set up playback related and other settings. Select [CUSTOM SETUP] in the Setup Display. To use the display, see "Using the Setup Display" (page 73). The default settings are underlined. CUSTOM SETUP PAUSE MODE: TRACK SELECTION: MULTI-DISC RESUME: AUDIO DRC: AUDIO (HDMI): AUTO OFF ON OFF OFF x [PAUSE MODE] (DVD VIDEO/DVD-R/ DVD-RW only) Selects the picture in pause mode. [AUTO] [FRAME] The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. The picture, including subjects that do not move dynamically, is output in high resolution. x [TRACK SELECTION] (DVD VIDEO only) Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, MPEG audio, or Dolby Digital format) are recorded. [OFF] [AUTO] No priority given. Priority given. Note • When you set the item to [AUTO], the language may change. The [TRACK SELECTION] setting has higher priority than the [AUDIO] settings in [LANGUAGE SETUP] (page 74). (Depending on the disc, this function may not work.) • If PCM, DTS, Dolby Digital sound, and MPEG audio tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital sound, and MPEG audio tracks in this order. Advanced Settings and Adjustments x [MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only) Switches the Multi-disc Resume setting on or off. [ON] [OFF] Stores the resume settings in memory for up to 40 discs. Does not store the resume settings in memory. Playback restarts at the resume point only for the current disc in the system. x [AUDIO DRC] (DVD VIDEO only) Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night. [OFF] [STANDARD] [MAX] No compression of dynamic range. Reproduces the sound track with the kind of dynamic range that the recording engineer intended. Compresses dynamic range fully. x [AUDIO (HDMI)] Selects the type of audio signal output from the HDMI OUT jack. [OFF] [AUTO] [PCM] The sound is not output from the HDMI OUT jack. Outputs audio signals that is matched to the requested audio stream from the connected TV. Converts Dolby Digital, DTS (digital theater system), or 96 kHz/24 bit PCM (pulse code modulation) signals to 48 kHz/ 16 bit PCM (pulse code modulation). Note • A loud noise (or no sound) will be output if you connect the system to a TV that is not compatible with DOLBY DIGITAL/DTS (digital theater system) signals and [AUTO] is selected. In this case, select [PCM]. • When you connect the system and TV with the HDMI cord and [AUTO] or [PCM] is selected, AUDIO DRC, A/V SYNC, DYNAMIC BASS, MOVIE/ MUSIC, and sound field are not applied to the sound that is output from the TV. 77US