Sony DAV-HDX266 Operating Instructions - Page 15
Step 3: Performing the Quick Setup, without inserting a disc. - inputs
View all Sony DAV-HDX266 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started - BASIC - Step 3: Performing the Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the system. "/1 C/X/x/c, DISPLAY LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH FRENCH SPANISH PORTUGUESE 5 Press X/x to select a language. The system displays the menu and subtitles in the selected language. 6 Press . The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 16:9 YCBCR/RGB (HDMI): 16:9 SCREEN SAVER: 4:3 LETTER BOX BACKGROUND: 4:3 PAN SCAN BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL 1 Turn on the TV. 2 Press [/1. Note • Disconnect the headphones when you perform the Quick Setup. You cannot operate steps after 11 with the headphones connected. • Make sure that the function is set to "DVD" (page 26). 3 Switch the input selector on your TV so that the signal from the system appears on the TV screen. [Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 17) and perform again. 4 Press without inserting a disc. The Setup Display for selecting the language used in the on-screen display appears. 7 Press X/x to select the setting that matches your TV type. x If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode [16:9] (page 72) x If you have a 4:3 standard TV [4:3 LETTER BOX] or [4:3 PAN SCAN] (page 72) 8 Press . The Setup Display for selecting the speaker formation appears. 9 Press C/c to select the speaker formation image as the speakers are actually positioned. For details, see "Getting Optimal Surround Sound for a Room" (page 66). SPEAKER FORMATION STANDARD continued 15GB