Sony DCR DVD203 Operating Guide - Page 42
Playing the picture on a TV, When your TV is connected to a VCR, To set the aspect ratio according
UPC - 027242669840
View all Sony DCR DVD203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Playing the picture on a TV Connect your camcorder to the wall outlet using the supplied AC adaptor for this operation (p.17). Refer also to the instruction manuals supplied with the devices to be connected. A/V jack (Yellow) (White) (Red) S VIDEO VIDEO AUDIO : Signal flow A/V connecting cable (supplied) Connect to the input jack of the other device. A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality pictures can be produced than with an A/V cable connection. Connect the white and red plug (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (optional). The yellow plug connection is not necessary. When your TV is connected to a VCR Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the VCR to LINE. VCRs or TVs To set the aspect ratio according to the connected TV (16:9/4:3) (DCR-DVD203/DVD403/DVD703/ DVD803) Change the setting according to the screen size of the TV you will view pictures on. Slide the POWER switch down to light up the (Play/Edit) lamp. Touch [SETUP] STANDARD SET [TV TYPE] [16:9] or [4:3] . • When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, or via an S VIDEO jack, and play back the disc, set [TV TYPE] to [16:9]. The TV switched to full mode automatically. Refer also to the manual supplied with your TV. • When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded picture's aspect ratio switches between 16:9 and 4:3, the image may jitter. 42