Sony DCR-IP45 Operating Instructions - Page 152

Connecting your camcorder to your computer using the i.LINK cable - For Windows users You can view or edit the images recorded on a tape using your computer. You can record images edited with the computer on the tape. To view images on your computer, the application software MovieShaker Ver.3.1 for MICROMV (supplied) and i.LINK cable is required. Computer i.LINK connector i.LINK (MICROMV Interface) i.LINK cable Note To view images on your computer, you have to install the i.LINK driver and the application software into your computer. They are included in the supplied application software MovieShaker Ver.3.1 for MICROMV. Before installing the i.LINK driver and the application software into your computer, be sure not to connect the camcorder to the computer. For details on installing and on an i.LINK connection, refer to the operating instructions supplied with MovieShaker Ver.3.1 for MICROMV. Recommended computer environment Recommended Windows environment OS: Microsoft Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional. Standard installation is required. Operation is not assured if the above environment is an upgraded OS. CPU: Pentium III 600 MHz or faster (required) Pentium III 800 MHz or faster (recommended) Main memory: 128 MB or larger (required) 256 MB or larger (recommended) Display: 800 × 600 or larger screen size/1024 × 480 or larger screen size, 16 bit color or higher Hard disk: 100 MB hard disk space (for installation), ATA66 or higher speed (required for capturing an image) The i.LINK (IEEE1394) connector must be provided as standard. Note Operations are not guaranteed for all the recommended computer environments mentioned above. 152