Sony DCR-SR300 Handycam® Handbook - Page 56
Guideframe, Dcr-sr200/sr300, Zebra, Remaining, Flash Level, Redeye Reduc
View all Sony DCR-SR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
GUIDEFRAME (DCR-SR200/SR300) You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/ BATT INFO to make the frame disappear. z Tips • Positioning the subject at the cross point of the guide frame makes a balanced composition. ZEBRA (DCR-SR200/SR300) Diagonal stripes appear in portions of the screen where brightness is at a preset level. This is useful as a guide when adjusting the brightness. When you change the default setting, is displayed. The zebra pattern is not recorded. B OFF The zebra pattern is not displayed. 70 The zebra pattern appears at a screen brightness level of about 70 IRE. 100 The zebra pattern appears at a screen brightness level of about 100 IRE or higher. b Notes • Portions of the screen where brightness is about 100 IRE or above may appear overexposed. z Tips • IRE represents the screen brightness level. REMAINING B AUTO Displays the remaining recording time of movies for about 8 seconds in situations such as those described below. - When your camcorder recognizes the remaining hard disk capacity with the POWER switch is set to (Movie). - When you press DISP/BATT INFO to switch the indicator from off to on with the POWER switch is set to (Movie). - When you select the movie recording mode on the HOME MENU. ON Always displays the remaining hard disk indicator. b Notes • When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen. S FLASH LEVEL (DCR-SR200/SR300) See page 59. S REDEYE REDUC (DCR-SR200/SR300) See page 59. 56