Sony DCR-TRV140 Operating Instructions - Page 117
Symptom, Cause and/or Corrective Actions - power cord
UPC - 027242600263
View all Sony DCR-TRV140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Types of trouble and their solutions Symptom Cause and/or Corrective Actions The melody or beep sounds for 5 seconds. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimate. (p. 129) • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. No function works though the power is on. • Disconnect the power cord of the AC power adaptor or remove the battery pack, then reconnect it after about 1 minute. Turn the power on (p. 13, 18). If the functions still do not work, press RESET using a sharp-pointed object. (If you press RESET, all the settings including the date and time return to the default.) (p. 140) While charging the battery pack, no indicator appears or the indicator flashes in the display window. • The AC power adaptor is disconnected. c Connect it firmly. (p. 18) • The battery pack is not installed properly. c Install it properly. • Something is wrong with the battery pack. c Contact your Sony dealer or local authorized Sony service facility. You cannot charge the battery pack installed to your camcorder. • The POWER switch is not set to OFF (CHG). c Set it to OFF (CHG). The date or time indicator does not appear, and the bars appear. • Set the date and time. (p. 19) *1) CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only *2) DCR-TRV140 only *3) CCD-TRV608, DCR-TRV140 only *4) CCD-TRV107/TRV408, DCR-TRV140 only Troubleshooting 117