Sony DCRVX2000 Operating Instructions - Page 147
Troubleshooting, In the playback mode, Symptom, Cause and/or Corrective Actions
UPC - 027242572874
View all Sony DCRVX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Additional Information Troubleshooting Symptom Some tiny white spots appear on the LCD screen or in the viewfinder. Unknown pictures or messages are displayed on the LCD screen or in the viewfinder. The click of the shutter does not sound. The image is not bright even if you use the video flash light. Cause and/or Corrective Actions • When the shutter speed is too low or the low lux mode is selected. • If 10 minutes elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the menu settings without a cassette inserted, your camcorder automatically starts the demonstration. c Insert a cassette. The demonstration stops. You can also cancel DEMO MODE. (p. 112) • BEEP is set to OFF in the menu settings. c Set it to MELODY or NORMAL. (p. 107) • The ND FILTER selector is set to 1 or 2. c Set it to OFF. (p. 46) • The manual adjustment is not suitable for the situations. (The indicator flashes.) c Set the AUTO LOCK selector to AUTO LOCK, or cancel the manual adjustment. (p. 43) In the playback mode Symptom The tape does not move when a video control button is pressed. The playback button does not function. There are horizontal lines on the picture or the playback picture is not clear or does not appear. No sound or only a low sound is heard when playing back a tape. The title search function does not work. Cause and/or Corrective Actions • The POWER switch is not set to VCR. c Set it to VCR. (p. 26) • The tape has run out. c Rewind the tape. (p. 29) • The video head may be dirty. c Clean the heads using the Sony DVM12CL cleaning cassette (not supplied). (p. 157) • The volume is turned to minimum. c Turn up the volume. (p. 26) • AUDIO MIX is set to the ST2 side in the menu settings. c Adjust AUDIO MIX. (p. 107) • The tape has no cassette memory. c Use a tape with cassette memory. (p. 66, 143) • CM SEARCH is set to OFF in the menu settings. c Set it to ON. (p. 107) • There is no title in the tape. c Superimpose the titles. (p. 97) • The tape has a blank portion in the recorded portion. (p. 66) (continued on the following page) 147