Sony DPFXR100 Operating Instructions - Page 14
Let’s view an image, Inserting a memory card, When you insert a memory card - s frame dpf xr100
View all Sony DPFXR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Let's view an image PNote When using a memory card of the following types, make sure to insert it in an appropriate adaptor. If you insert it without an adaptor, you may be unable to remove it. As shown in the right-most illustration below, make sure to insert the following types of memory cards with inserted in the appropriate adaptor. 1miniSD/miniSDHC 1 miniSD/ miniSDHC adaptor 2microSD/microSDHC Inserting a memory card Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame). CompactFlash card* (Slot A) xD-Picture Card (Slot B) SD memory card (Slot B) Access lamp 2 microSD/ microSDHC adaptor 3"Memory Stick Micro" "M2" adaptor (standard size) "Memory Stick" (Slot B) "Memory Stick Duo" (Slot C) 3 "M2" adaptor (Duo size) When you insert a memory card The images on the memory card are automatically displayed. * A CompactFlash card can be used with the DPF-XR100 only. z Tip • S-Frame fails to auto rotate if: - An image file has been shot with a DSC which doesn't support Exif rotate tag recording. - An image file is retouched and saved with retouching software which breaks the Exif rotate tag. If you switch off the power while they are being displayed If you switch the power back on, the same images continue to be displayed. If the access lamp does not flash Reinsert the memory card after checking the label side of the memory card. About the B and C slots If you insert memory cards both into the B and C slots simultaneously, the photo frame will not work properly. 14 GB