Sony DR-BT22 Operating Instructions - Page 16

To adjust the volume Press the VOL + or - button while listening to the music. Tips • Depending on the connected device, it may be necessary to adjust the volume on the connected device as well. • Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. To stop use 1 Terminate the Bluetooth connection by operating the Bluetooth device. 2 Press and hold the POWER button for about 3 seconds. The indicator (blue) and indicator (red) light up together, and the unit turns off. Tip When you finish playing music, the Bluetooth connection may terminate automatically, depending on the Bluetooth device. 16 US Controlling the audio device - AVRCP If the Bluetooth audio device connected with this unit supports AVRCP (Audio Video Remote Control Profile), you can control by using the unit buttons. Refer to the operating instructions supplied with the Bluetooth device on how to operate it. Note Operation of the Bluetooth connecting device by this unit will vary depending on its specification. Status: In stop or pause mode Nx FF / REW Short Press Long Press 1 2 3 4 1 Starts playback*1 2 Stop 3 Skip to next/previous 4 Fast-forward/Fast-rewind*2 Status: In play mode Nx FF / REW Short Press Long Press 5 6 7 8 5 Pause*1 6 Stop 7 Skip to next/previous 8 Fast-forward/Fast-rewind*2 *1 You may need to press the button twice depending on the Bluetooth device. *2 Some Bluetooth devices may not operate. Note You cannot adjust the volume of the Bluetooth device by the unit volume buttons.