Sony DSC-P7 Operating Instructions (primary manual) - Page 85
Others, indicator on the LCD
View all Sony DSC-P7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Others Symptom The camera does not work, no operations can be performed. Cause • An "InfoLITHIUM" battery is not used. • The battery level is low or zero (The indicator appears.). • The AC power adaptor is not connected securely. • The internal system is not working properly. The power is on, but the • The internal system is not working properly. camera does not work. You cannot identify the - indicator on the LCD screen. The lens does not move • The battery pack is discharged. back when you turn off the camera. The lens gets fogged. • Condensation is occurring. The camera gets hot if you - use it for a long time. Solution p Use an "InfoLITHIUM" battery only (page 96). p Charge the battery (page 10). p Connect it securely to the DC IN jack of your camera and to a wall outlet (wall socket) (page 14). p Disconnect, and then, after one minute, reconnect all power sources. Then turn the power on and check that the camera works properly. p Remove, and then, after one minute, reinstall the battery. If this does not work, press the RESET button located inside the battery/"Memory Stick" cover with a pointed object, then turn the power on again. (This will clear the date/time settings, etc.) p Check the indicator (pages 99 to 101). p Replace it with a fully charged battery or use the AC power adaptor (pages 10, 14). p Leave the camera for about an hour and then try to use it again (page 95). p This is not a malfunction. Troubleshooting 85