Sony DSCP100 Operating Instructions - Page 104
Others, The lens gets fogged.
UPC - 027242650183
View all Sony DSCP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Others Symptom Your camera does not work. Cause • You are not using an "InfoLITHIUM" battery pack. • The battery level is low. (The E indicator appears.) • The AC Adaptor is not connected securely. The power is on, but the • The built-in microcomputer is not working camera does not work. properly. You cannot identify an indicator on the screen. The lens gets fogged. - • Moisture condensation has occurred. The camera becomes warm when you use it for the long time. The lens does not move when you turn off the camera. - • The battery pack is discharged. Solution p Use an "InfoLITHIUM" battery pack (page 117). p Charge the battery pack (page 11). p Connect it securely to the DC IN jack of your camera and to a wall outlet (wall socket) (page 14). p Disconnect, and then, after one minute, reconnect all power sources and turn on the camera. If this does not work, press the RESET button located inside the battery/"Memory Stick" cover with a pointed object, then turn the power on again. (This will clear the date and time settings, etc.) p Check the indicator (pages 120 to 123). p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 115). p This is not a malfunction. p Replace it with a charged battery pack (page 11) or use the AC Adaptor (page 14). 104