Sony DSCP100 Operating Instructions - Page 107

Self-diagnosis display, actions. The last two digits indicated

Page 107 highlights

Self-diagnosis display - If a code starting with an alphabet letter appears Your camera has a self-diagnosis display. This function displays the camera condition on the LCD screen with a combination of a letter and four numerical digits. If this occurs, check the following code chart and attempt the corresponding corrective actions. The last two digits (indicated by ss) will differ depending on the state of the camera. C:32:ss Code C:32: ss C:13: ss E:61: ss E:91: ss Cause Countermeasure There is trouble with your camera's hardware. • Turn the power off and on again (page 15). The camera cannot read or write • Re-insert the "Memory Stick" several data on the "Memory Stick." times. An unformatted "Memory Stick" • Format the "Memory Stick" (page 42). is inserted. The inserted "Memory Stick" • Insert a new "Memory Stick" (page 18). cannot be used with your camera, or the data is damaged. A camera malfunction that you cannot reverse has occurred. • Press the RESET button (page 95) located inside the battery/"Memory Stick" cover, then turn the power on again. If you are unable to solve the problem even after trying the corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. Self-diagnosis display Troubleshooting 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

107
Troubleshooting
Self-diagnosis display
– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss
) will differ depending on the state of
the camera.
C:32:
ss
Self-diagnosis display
If you are unable to solve the problem even after trying the corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.
Code
Cause
Countermeasure
C:32:
ss
There is trouble with your
camera’s hardware.
Turn the power off and on again
(page 15).
C:13:
ss
The camera cannot read or write
data on the “Memory Stick.”
Re-insert the “Memory Stick” several
times.
An unformatted “Memory Stick”
is inserted.
Format the “Memory Stick” (page 42).
The inserted “Memory Stick”
cannot be used with your camera,
or the data is damaged.
Insert a new “Memory Stick” (page 18).
E:61:
ss
E:91:
ss
A camera malfunction that you
cannot reverse has occurred.
Press the RESET button (page
95) located
inside the battery/“Memory Stick” cover,
then turn the power on again.