Sony DSLR A230 Instruction Manual - Page 154

Unable to magnify., System error

Page 154 highlights

Unable to display. • Images recorded with other cameras or images modified with a computer may not be able to be displayed. No lens attached. Shutter is locked. • The lens is not attached properly, or the lens is not attached. • When attaching the camera to an astronomical telescope or something similar, set the recording mode to M. No images • There is no image in the memory card. Image protected • You tried to delete protected images. Unable to print. • You tried to mark RAW images with a DPOF mark. Initializing USB connection... • A USB connection has been established. Do not disconnect the USB cable. Check the connected device. • A PictBridge connection cannot be established. Disconnect the USB cable and connect it again. 154 Camera overheating. Allow it to cool. • The camera has become hot because you have been shooting continuously. Turn the power off. Cool the camera and wait until the camera is ready to shoot again. Camera error System error • Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Unable to magnify. Unable to rotate image. • Images recorded with other cameras may not be enlarged or rotated. No images changed • You attempted to protect images or specified DPOF without changing the specification of those images. Cannot create more folders. • The folder with a name beginning with "999" exists on the memory card. You cannot create any folders if this is the case. Printing canceled • The print job was canceled. Disconnect the USB cable or turn the camera off.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162

154
Unable to display.
Images recorded with other
cameras or images modified with
a computer may not be able to be
displayed.
No lens attached. Shutter is
locked.
The lens is not attached properly,
or the lens is not attached.
When attaching the camera to an
astronomical telescope or
something similar, set the
recording mode to M.
No images
There is no image in the memory
card.
Image protected
You tried to delete protected
images.
Unable to print.
You tried to mark RAW images
with a DPOF mark.
Initializing USB connection...
A USB connection has been
established. Do not disconnect
the USB cable.
Check the connected device.
A PictBridge connection cannot
be established. Disconnect the
USB cable and connect it again.
Camera overheating. Allow it to
cool.
The camera has become hot
because you have been shooting
continuously.
Turn the power off. Cool the
camera and wait until the camera
is ready to shoot again.
Camera error
System error
Turn the power off, remove the
battery pack, then re-insert it. If
the message appears frequently,
consult your Sony dealer or local
authorized Sony service facility.
Unable to magnify.
Unable to rotate image.
Images recorded with other cameras
may not be enlarged or rotated.
No images changed
You attempted to protect images
or specified DPOF without
changing the specification of
those images.
Cannot create more folders.
The folder with a name beginning
with “999” exists on the memory
card. You cannot create any
folders if this is the case.
Printing canceled
The print job was canceled.
Disconnect the USB cable or
turn the camera off.