Sony DSLR A700 User's Guide - Page 126
Reset default, beyond the lens mount. You do not need to put the blower close to the image - body
UPC - 027242714151
View all Sony DSLR A700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
For details on the operation 1 page 32 • After the image sensor vibrates for a short time, the mirror in front is lifted. 4 Detach the lens. 5 Use the blower to clean the image sensor surface and the surrounding area. • Do not touch the image sensor with the tip of the blower. Complete the cleaning quickly. • Hold the camera's face downward to prevent the dust from resettling in the camera. • Do not use a spray blower because it may scatter vapor inside the camera body. • When cleaning the image sensor, do not put the tip of a blower into the cavity beyond the lens mount. You do not need to put the blower close to the image sensor. 6 Attach the lens and set the POWER switch to OFF. • The camera starts beeping if the battery pack becomes low during cleaning. Stop the cleaning immediately and set the POWER switch to OFF. z To keep dust from entering the camera • Choose a location with little dust to change the lens, and complete the operation quickly. • Do not leave the camera without a lens or the body cap. • When attaching the body cap, remove all the dust from the cap before placing it on the camera. Reset default You can reset the main functions of the camera. 1 Select [Reset default], then press the center of the multi-selector. The message "Reset default?" appears. 2 Select [OK] with v on the multi-selector, then press the center of the multi-selector. The main functions are reset. • For details on the items to be reset, see "Reset default" (page 172). 126