Sony DSLR A700 User's Guide - Page 64

2 Hold the camera so that the white area fully covers the spot-metering circle and press the shutter button down. The register selection screen appears. 3 Select a memory number with b/B, then press the center. To call the custom white balance setting Select the desired number. • The custom white balance setting registered in this operation is effective until a new setting is registered. (The setting is retained after the power is turned off.) • If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash light taken into account. Take pictures with the flash in later shootings. • The message "Custom WB error" indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a bright color is in the frame.) If you register this value, the indicator turns yellow on the recording information display on the LCD monitor. You can shoot at this point, but it is recommended that you set the white balance again to get a more correct white balance value. Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number from the standard (ISO 200), the higher the sensitivity. ISO button Multi-selector 64