Sony DSLRA500 Instruction Manual - Page 167
PictBridge compliant printer, Others, Cannot operate the camera after canceling printing.
UPC - 027242748590
View all Sony DSLRA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
• When you print images at a shop, images can be printed with the date if you ask them to do so. PictBridge compliant printer For details, refer to the operating instructions supplied with the printer or consult with the manufacturer of the printer. A connection cannot be established. • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. • Set [USB connection] to [PTP] (page 154). • Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. Cannot print images. • Check that the camera and the printer are properly connected using the USB cable. • RAW images cannot be printed. • Images shot using cameras other than this camera or images modified with a computer may not be printed. Cannot print the image at the size selected. • Disconnect the USB cable and reconnect it whenever you change the paper size after the printer has been connected to the camera. Cannot operate the camera after canceling printing. • Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer. Others The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it (page 172). 167 Others