Sony DSR2000A Family Brochure (dvcam_2) - Page 25

24 SPECIFICATIONS (NTSC MODELS) Specifications (NTSC Models) DSR-2000A/DSR-1800A/DSR-1600A/DSR-1500A StudioVTRs General Power requirements Power consumption (Max.) Operating temperature Storage temperature Operating humidity Storage humidity Tape speed Recording/Playback time Fast forward/Rewind time Search speed Weight Dimensions (W x H x D, excluding projections) Video Performance Bandwidth Luminance (via analog component I/O) Chrominance S/N ratio (via analog component I/O) K-factor (K2T, KPB) Y/C delay Audio Performance Frequency response 2 CH mode (48 kHz/16-bit) 4 CH mode (32 kHz/12-bit) Dynamic range Distortion (THD+N) Video Signal Inputs Analog Ref. Video (BNC x2, loop-through connection) Video (BNC x2, loop-through connection) *1 Component Y (BNC x3) *1 R-Y B-Y S-Video *1 Digital SDI *2,*3 SDTI (QSDI) (BNC x1) *3 i.LINK (DV) (6-pin x1) Audio Signal Inputs Analog Audio *1 Digital AES/EBU *2,*3 Video Signal Outputs Analog Ref. Video (BNC x1) Video Component (BNC x3) S-Video Digital SDI *2,*3 SDTI (QSDI) *3 HD-SDI (BNC x 2) *5 *6 i.LINK (DV) (6-pin x1) Audio Signal Outputs Analog Audio Monitor Headphone (JM-60 headphone jack x1) Digital AES/EBU*2,*3 Time Code Input/Output In (BNC x1) Out (BNC x1) Remote Supplied Accessories DSR-2000A DSR-1800A DSR-1600A DSR-1500A AC 100 V to 240 V, 50/60 Hz 120 W 100 W 70 W 55 W 41 °F to 104 °F (5 °C to 40 °C) -4 °F to 140 °F (-20 °C to 60 °C) Less than 80% Less than 90% 28.193 mm/s Standard size: 184 min.(DVCAM mode), 276 min.(DV SP mode)* with PDV-184ME/184N/184MEM, Mini size: 40 min.(DVCAM mode), 60 min.(DV SP mode)* with PDVM-40ME/40N/40MEM Standard size: Less than 3 min. with PDV-184ME/184N/184MEM, Mini size: Less than 1 min. with PDVM-40ME/40N/40MEM Shuttle mode: still to ±60 times normal speed Digital slow mode: ±1 times Shuttle mode: still to ±60 times normal speed Digital slow mode: ±0.5 times normal speed normal speed 39 lb 10 oz (18 kg) 28 lb 10 oz (13 kg) 13 lb 3 oz (6 kg) 16 7/8 x 7 x 19 5/8 inches 16 7/8 x 6 7/8 x 15 3/4 inches 8 3/8 x 5 1/8 x 16 5/8 inches (427 x 175 x 495.5 mm) (427 x 174 x 400 mm) (210 x 130 x 420 mm) 30 Hz to 5.0 MHz ±1.0 dB 5.75 MHz +0/-3.0 dB (Typical measurement) 30 Hz to 5.0 MHz ±1.0 dB 30 Hz to 1.5 MHz + 1.0/-5.0 dB More than 55 dB Less than 2.0% Less than 30 ns 30 Hz to 5.0 MHz +1.0/-1.5 dB 20 Hz to 20 kHz +0.5/-1.0 dB 20 Hz to 14.5 kHz +0.5/-1.0 dB More than 90 dB Less than 0.05% 20 Hz to 20 kHz ±1.0 dB 20 Hz to 14.5 kHz ±1.0 dB More than 87 dB Less than 0.07% 0.286 Vp-p, 75 Ω, sync negative Black Burst Composite, 1.0 Vp-p, 75 Ω, sync negative 1.0 Vp-p, 75 Ω, sync negative 0.7 Vp-p, 75 Ω (75 %) 0.7 Vp-p, 75 Ω (75 %) DIN 4-pin x1 Y: 1.0 Vp-p, 75 Ω, sync negative C: 0.286 Vp-p, 75 Ω (at burst level) BNC x2, active-through connection Conforms to Serial Digital Interface (270 Mb/s), SMPTE 259M Conforms to SDTI (270 Mb/s), - SMPTE 305M/322M IEEE1394 - 0.286Vp-p, 75Ω, sync negative - Composite, 1.0 Vp-p, 75 Ω, sync negative - 1.0 Vp-p, 75 Ω, sync negative - 0.7 Vp-p, 75 Ω (75 %) - 0.7 Vp-p, 75 Ω (75 %) - BNC x2 Y: 1.0 Vp-p, 75 Ω, sync negative C: 0.286 Vp-p, 75 Ω (at burst level) - BNC x1 Conforms to Serial Digital Interface (270 Mb/s), SMPTE 259M - Conforms to SDTI (270 Mb/s), SMPTE 305M/322M - IEEE1394 XLR 3-pin female x4 -6/0/+4 dBu, 600 Ω on/off/-60 dBu, high impedance BNC x 2 75 Ω, unbalanced - XLR 3-pin female x2 -6/0/+4 dBu, high impedance - BNC x2 75 Ω, unbalanced Video 1/2/3(SUPER) BNC x3 0.286 Vp-p, 75 Ω, sync negative Video 1/2(SUPER) BNC x2 Composite, 1.0 Vp-p, 75 Ω, sync negative Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y: 0.7 Vp-p, 75 Ω (75 %), B-Y: 0.7 Vp-p, 75 Ω (75 %) DIN 4-pin x1 Y: 1.0 Vp-p, 75 Ω, sync negative C: 0.286 Vp-p, 75 Ω (at burst level) BNC x3 BNC x1 BNC x2 Conforms to Serial Digital Interface (270 Mb/s), SMPTE 259M - Conforms to SDTI (270 Mb/s), SMPTE 305M/322M Conforms to Serial Digital Interface (1.485 Gb/s),SMPTE 292 IEEE1394 - Video 1/2/3 (SUPER) BNC x3 BNC x2 BNC x2 - RS-422A: D-sub 9-pin female x2 Video Control: D-sub 15-pin male x1 Control Panel: D-sub 15-pin female x1 AC Power Cord RCC-5G 9-pin Remote Control Cable Operating Instructions (CD-R) XLR 3-pin male x4 -6/0/+4 dBu (selectable by menu) 600Ω, loading, low impedance, balanced Phono x1 -11 dBu, 47 kΩ, unbalanced (-20 dBFS) -∞ to -13 dBu, 8 Ω, unbalanced (-20 dBFS) BNC x 2 75 Ω, unbalanced 0.5 Vp-p to 18 Vp-p, 3.3 kΩ, unbalanced 1.2 Vp-p, 75 Ω, unbalanced RS-422A: D-sub 9-pin female x1 Video Control: D-sub 15-pin male x1 Control S (SIRCS): Stereo mini jack x1 AC Power Cord Operating Instructions (CD-R) XLR 3-pin male x2 -∞ to -11 dBu, 47 kΩ, unbalanced (-20 dBFS) RS-422A: D-sub 9-pin female x1 Control S (SIRCS): Stereo mini jack x1 AC Power Cord CD-R (Operating Instructions) *1: The DSR-1500A only for recording and playback. *1: The optional DSBK-1505 is required for the DSR-1500A. *2: The optional DSBK1801 is required for the DSR-1800A. *3: The optional DSBK1501 is required for the DSR-1500A. *4: The optional DSBK-1601 is required for the DSR-1600A. *5: The optional DSBK-1820 is required for the DSR-1600A/DSR-1800A. *6 The optional DSBK-2020 is required for the DSR-2000A.