Sony DSR2000A Family Brochure (dvcam_2) - Page 27
Other, General, Video, Audio, Input/Output Terminals
View all Sony DSR2000A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
26 SPECIFICATIONS (NTSC MODELS) DSR-50 Portable Recorder General System DC input Power consumption Operating temperature Storage temperature Tape speed Recording/Playback time Weight Dimensions (W x H x D) Video Recording mode Playback mode Audio Recording mode Playback mode Input/Output Terminals Video IN Composite S (4-pin mini DIN) NTSC XLR 4-pin (male), +12 V 15 W 41 °F to 104 °F (5 °C to 40 °C) -4 °F to 140 °F (-20 °C to 60 °C) Approx. 28.2 mm/s (DVCAM mode), Approx. 18.8 mm/s (DV SP mode) 184 minutes (DVCAM mode), 270 minutes (DV SP mode), with PDV-184ME cassette 40 minutes (DVCAM mode), 60 minutes (DV SP mode), with PDVM-40ME cassette 8 lb 9 oz (3.9 kg), excluding battery and tape 9 3/4 x 3 3/4 x 12 1/4 inches (247 x 92.5 x 311 mm), excluding projections 11 x 4 x 12 1/2 inches (279 x 99 x 315 mm), including projections DVCAM/DV (SP mode only) DVCAM/DV (SP mode only) 48.0 kHz/16-bit (2CH)/ 32.0 kHz/12-bit (4CH)/automatic (DV IN) 48.0 kHz/16-bit (2CH)/32.0 kHz/12-bit (4CH) 32.0 kHz/16-bit (2CH)/44.1 kHz/16-bit (2CH) (automatically selected) 1.0 Vp-p, 75 Ω, Sync negative Y: 1.0 Vp-p, 75 Ω, Sync negative C: 0.286 Vp-p (subcarrier burst) 75 Ω Audio IN Camera IN Composite Component Reference IN Video OUT 1 (Monitor) Composite Video OUT 2 Composite S (4-pin mini DIN) Component OUT Audio OUT Audio OUT (Monitor) DV IN/OUT Timecode IN Timecode OUT Control S Remote Control Headphone jack (left side) Other Color LCD monitor Supplied accessories XLR 3-pin (female) (+4 dBu/-20 dBu/-60 dBu) x 4, impedance more than 3 kΩ with +48 V power supply (independently switched for each channel) 26-pin camera connector 1.0 Vp-p, 75 Ω, Sync negative Y: 1.0 Vp-p, 75 Ω, Sync negative B-Y: 0.7 Vp-p, 75 Ω, R-Y: 0.7 Vp-p, 75 Ω BNC, Black Burst 75 Ω, Sync negative (use Video IN) BNC, 1.0 Vp-p, 75 Ω, Sync negative Superimpose On/Off BNC, 1.0 Vp-p, 75 Ω, Sync negative Y: 1.0 Vp-p, 75 Ω, Sync negative C: 0.286 Vp-p (subcarrier burst) 75 Ω BNC x 3 Y: 1.0 Vp-p, 75 Ω, Sync negative B-Y/R-Y: 0.7 Vp-p, 75 Ω PIN Jack x 4, -10 dBu Standard output level -20 dB from full bit PIN Jack 6-pin (with lock) BNC, 0.5 to 18 Vp-p, 10 kΩ BNC, 2.2 Vp-p, 600 Ω/1.2 Vp-p, 75 Ω Stereo mini jack Stereo mini jack (Edge High/Edge Low/Level High/Level Low) (Tally) Stereo mini-mini jack (compatible with LANC as a player) Stereo standard jack, -19 dBu, with Level Control 2.5-inch (viewable area measured diagonally) type, 200,000 dots LCD Protection Cover, Cleaning Cassette DSR-DR1000A HardDiskRecorder General Power requirements Power consumption Operating temperature Storage temperature Operating humidity Storage humidity Weight Dimensions (W x H x D) Recording/playback time Video Performance AC 100 V to 240 V, 50/60 Hz 75 W 41 °F to 104 °F (5 °C to 40 °C) -4 °F to 140 °F (-20 °C to 60 °C) Less than 80% Less than 90% 16 lb 10 oz (7.5 kg) 8 3/8 x 5 1/8 x 16 5/8 inches, without projection (210 x 130 x 422 mm) 12 hours Bandwidth (via analog component I/O) S/N ratio (via analog component I/O) K-factor (K2T, KPB) Y/C delay Audio Performance Frequency response Dynamic range Distortion (THD + N) Video Signal Inputs Analog REF. Video (BNC x 2) Composite Video (BNC x 2), loop-through connection*1 Component (BNC x 3)*1 S-Video (BNC x 2)*2 Digital SDI (BNC x 2) i.LINK (DV)(6-pin x 1) Luminance Chrominance More than 54 dB 30 Hz to 5.0 MHz ±1.0 30 Hz to 1.5 MHz +1.0/-5.0 dB Less than 2.0% Less than 30 ns 2CH mode (48 kHz/16-bit) 20 Hz to 20 kHz ±1.0 dB 4CH mode (32 kHz/12-bit) 20 Hz to 14.5 kHz ±1.0 dB More than 87 dB Less than 0.07% (48 kHz) 0.286 Vp-p, 75 Ω sync negative 1.0 Vp-p, 75 Ω sync negative Y: 1.0 Vp-p, 75 Ω, sync negative R-Y: 0.7 Vp-p, 75 Ω(75% color bar) B-Y: 0.7 Vp-p, 75 Ω (75% color bar) Y: 1.0 Vp-p, 75 Ω, sync negative C: 0.286 Vp-p, 75 Ω (at burst level) Conforms to Serial Digital Interface (270 Mb/s), SMPTE259M IEEE 1394-based *1:Composite, Component and S-video inputs share the same BNC connectors. *2:Composite, Component and S-video outputs share the same BNC connectors. *3:The volume of monitor can be controlled by the PHONE LEVEL control knob. Audio Signal Inputs Analog Audio (XLR 3-pin female x 2) -6/0/+4 dBu (selectable by menu), high impedance Digital AES/EBU (BNC x 2) 75 Ω, unbalanced Video Signal Outputs Analog Composite 1/2(SUPER) (BNC x2)*2 1.0 Vp-p, 75 Ω, sync negative Component (BNC x 3)*2 Y: 1.0 Vp-p, 75 Ω, sync negative R-Y: 0.7 Vp-p, 75 Ω (75% color bar) B-Y: 0.7 Vp-p, 75 Ω (75% color bar) S-Video (BNC x 2)*2 Y: 1.0 Vp-p, 75 Ω, sync negative C: 0.286 Vp-p, 75 Ω (at burst level) Digital SDI (BNC x 2) Conforms to Serial Digital Interface (270 Mb/s), SMPTE259M i.LINK (DV) (6-pin x 1) IEEE 1394-based Audio Signal Outputs Audio (Analog) Audio (XLR 3-pin male x 2) -6/0/+4 dBu (selectable by menu) Monitor (RCA x 1)*3 - ∞ to -11 dBu, 47kΩ, unbalanced (-20 dBFS) Headphone - ∞ to -13 dBu, 8Ω, unbalanced (-20 dBFS) (JM-60 headphone jack x 1) Audio (Digital) AES/EBU (BNC x 2) 75 Ω, unbalanced Time Code Time Code In (BNC x 1) 0.5 Vp-p to 18.0 Vp-p, 3 kΩ, unbalanced Time Code Out (BNC x 1) 2.2 Vp-p, 600 Ω, unbalanced Remote RS-422A D-sub 9-pin, female x 2 Control Mini jack x 1 Network Ethernet (x 1) 10/100 Base-T Ethernet, RJ-45 modular jack Supplied Accessories AC power cord x 1, RM-LG2 (Remote Control Unit) x 1, Operation manual (CD-ROM) x 1, Warranty card x 1