Sony DSX-M55BT Operating Instructions - Page 10
Pairing and connecting with a, BLUETOOTH device, Connecting with a paired BLUETOOTH, device
![]() |
View all Sony DSX-M55BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To disconnect by One touch Touch the N-Mark part of the unit with the N-Mark part of the smartphone again. Notes When making the connection, handle the smartphone carefully to prevent scratches. One touch connection is not possible when the unit is already connected to another NFC compatible device. In this case, disconnect the other device, and make connection with the smartphone again. Pairing and connecting with a BLUETOOTH device When connecting a BLUETOOTH device for the first time, mutual registration (called "pairing") is required. Pairing enables this unit and other devices to recognize each other. 1 Place the BLUETOOTH device within 1 m (3 ft) of this unit. 2 Press CALL, rotate the control dial to select [SET PAIRING], then press it. flashes while the unit is in pairing standby mode. 3 Perform pairing on the BLUETOOTH device so it detects this unit. 4 Select [DSX-M55BT] shown in the display of the BLUETOOTH device. If your model name does not appear, repeat from step 2. 5 If passkey* input is required on the BLUETOOTH device, input [0000]. * Passkey may be called "Passcode," "PIN code," "PIN number" or "Password," etc., depending on the device. Input passkey [0000] When pairing is made, stays lit. 6 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or lights up when the connection is made. Note While connecting to a BLUETOOTH device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. To start playback For details, see "Playing a BLUETOOTH Device" (page 15). To cancel pairing Perform step 2 to cancel the pairing mode after this unit and the BLUETOOTH device are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 1 Press CALL, rotate the control dial to select [SET BT SIGNL], then press it. Make sure that lights up. 2 Activate the BLUETOOTH function on the BLUETOOTH device. 10GB
![](/manual_guide/products/sony-dsxm55bt-operating-instructions-c8c74d3/10.png)