Sony DSX-M55BT Operating Instructions - Page 14
Selecting channels for SiriusXM, To select channels from categories, To store channels
View all Sony DSX-M55BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference. In the USA, you can activate online or by calling SiriusXM Listener Care: Online: Visit www.siriusxm.com/activatenow Phone: Call 1-866-635-2349 In Canada, you can activate online or by calling SiriusXM Listener Care: Online: Visit www.siriusxm.ca/activatexm Phone: Call 1-877-438-9677 As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display: [SUBSCRIPTION UPDATED - ENTER TO CONTINUE]. Once subscribed, you can tune to channels in your subscription plan. Notes The activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be turned on and receiving the SiriusXM signal to receive the activation message. Selecting channels for SiriusXM 1 Press (browse). 2 Rotate the control dial to select [CHANNEL], then press it. 3 Rotate the control dial to select the desired channel, then press it. To select channels from categories 1 Press (browse). 2 Rotate the control dial to select [CATEGORY], then press it. 3 Rotate the control dial to select the desired category, then press it. To store channels 1 While receiving the channel that you want to store, press and hold a number button (1 to 6) until [MEM] appears. To receive the stored channel, press MODE to select [SX1], [SX2] or [SX3], then press a number button (1 to 6). To set a parental control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels. Information on setting up the passcode and locking channels can be found below. 1 Press MENU and rotate the control dial. 2 Select [SET GENERAL] [SET PARENTAL] [SET LOCK SEL] [SET LOCK-ON]. 3 Enter the passcode by rotating the control dial on the unit or pressing / on the remote commander. To move the entry position, press SEEK +/- on the unit or / on the remote commander. The initial passcode is [0000]. 4 After entering the passcode, press ENTER. To unlock the channels, select [SET LOCK-OFF]. To change the passcode 1 Press MENU and rotate the control dial. 2 Select [SET GENERAL] [SET PARENTAL] [SET CODEEDIT]. 3 Enter the current passcode on the current passcode input display, then press ENTER. The initial passcode is [0000]. 4 Enter your new 4-digit passcode on the new passcode input display, then press ENTER. To change display items Press DSPL to change as follows: Channel Number (Default) Channel Name Artist Name Song Title Content Info Category Name Clock 14GB