Sony DSX-S300BTX Operating Instructions - Page 35
SMS indicator, Music streaming, Listening to music from an audio device, device - a2dp
UPC - 027242787902
View all Sony DSX-S300BTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Notes • Check that unit and cellular phone are connected beforehand. • Store a voice tag on your cellular phone beforehand. • If you activate voice dialing with a cellular phone connected to this unit, this function may not work in some cases. • Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. • Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. For details, see the support site. • Do not use voice dialing on the cellular phone during handsfree device connection. Tips • Speak in the same way as you did when you stored the voice tag. • Store a voice tag while seated in the car, via this unit with Bluetooth Phone source selected. SMS indicator While connecting a cellular phone to this unit, the SMS indicator informs you of any incoming or unread SMS messages. If you receive a new SMS message, the SMS indicator flashes. If there are any unread SMS messages, the SMS indicator stays lit. Music streaming Listening to music from an audio device You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Connect this unit and the Bluetooth audio device (page 32). " " appears during connection. 2 Turn down the volume on this unit. 3 Press (SOURCE/OFF) repeatedly until "Bluetooth Audio" appears. 4 Operate the audio device to start playback. 5 Adjust the volume on this unit. Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 1 Start playback of the Bluetooth audio device at a moderate volume. 2 Set your usual listening volume on the unit. 3 Press the multi way encoder. 4 Rotate the multi way encoder until "Bluetooth Audio Level" appears, then press it. 5 Rotate the multi way encoder to adjust the input level ("+ 18dB" - "0dB" - "- 8dB"). Note Function of the SMS indicator may depend on the cellular phone. 35