Sony DVD910 Operation Guide - Page 113
Maintenance and precautions, About the disc
UPC - 027242727441
View all Sony DVD910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Maintenance and precautions About the disc See page 12 for the details of discs which you can use with your camcorder. Notes on use • Hold the disc by its edge while supporting the center hole lightly. Do not touch the recording side (the opposite of the printed side when using a single-sided disc). x Recording on the A side Place the disc in your camcorder with the side with the symbol at the center facing outwards until it clicks. symbol Additional Information • Before shooting, be sure to remove dust and fingerprints from the disc with a soft cloth. Otherwise you may not be able to record or play normally in some situations using that disc. • When you set the disc in your camcorder, press firmly until it clicks. When the message [C:13:ss] appears on the LCD screen, open the disc cover and set the disc again. • Do not attach any adhesive material such as a sticker on the surface of a disc. If you do so, the disc may become unbalanced, and this may cause a malfunction of the disc or your camcorder. Use of double-sided discs Double-sided discs allow you to record both sides of a disc. Place the symbol facing outwards. Recording is made on the rear side. • When using a double-sided disc, take care not to smudge the surface with fingerprints. • When a double-sided disc is used in your camcorder, recording/playback are performed on that side only. You cannot switch to record on or play back the other side with the disc set to the camcorder. When recording/playback of one side is complete, remove the disc and turn it over to access the other side. • Perform the following operations on each side of a double-sided disc: - Finalizing (p. 62) - Formatting (p. 66) - Unfinalizing (p. 68) Continued , 113