Sony DVP-CX777ES Operating Instructions (DVD Player DVPCX777ES) - Page 70

For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD VIDEO. Depending on the DVD VIDEO, the number of the recorded channels may differ. Current audio format* 1 2 3 ALL 1 2 ( 2 7 ) 1 8 ( 3 4 ) T 1:32:55 1: ENGLISH PLAY DVD PROGRAM FORMAT DOLBY DIGITAL 3/2.1 L CR LFE LS RS Currently playing program format** * "PCM," "DTS," or "DOLBY DIGITAL" is displayed. The channels in the currently selected track are displayed by numbers as follows: For Dolby Digital 5.1 ch: Rear component 2 SURROUND Mode Settings You can enjoy surround sounds while playing discs, including Dolby Digital and DTS DVDs, even if you have only 2 or 4 speakers. Select the surround mode that best suits your speaker setup. SUR DOLBY DIGITAL 3 / 2 . 1 Front component 2 + Center component 1 LFE (Low Frequency Effect) component 1 **The letters in the program format display indicate the following sound components: L: Front (left) R: Front (right) C: Center LS: Rear (left) RS: Rear (right) S: Rear (monaural): The rear component of the Dolby Surround processed signal and the Dolby Digital signal LFE: Low Frequency Effect signal z Hint When playing Dolby Digital and DTS sound tracks, "LFE" is enclosed in a dotted line when the LFE signal is not being output. 1 Press SUR during playback. The following display appears. TVS DYNAMIC 2 Press SUR repeatedly to select one of the surround modes. See the following explanations given for each item. ◆ For 2 speaker setups • TVS DYNAMIC • TVS WIDE • TVS NIGHT • TVS STANDARD 70