Sony DVP-NC655PS Operating Instructions - Page 52

Current audio format* 1 1 2 ( 2 7 ) 1 8 ( 3 4 ) T 1:32:55 1: ENGLISH PLAY DVD VIDEO PROGRAM FORMAT DOLBY DIGITAL 3/2.1 L CR LFE LS RS Currently playing program format** *"PCM," "DTS," or "DOLBY DIGITAL" is displayed. In the case of "DOLBY DIGITAL," the channels in the playing track are displayed by numbers as follows: For Dolby Digital 5.1 ch: Rear component 2 DOLBY DIGITAL 3 / 2 . 1 Front component 2 + LFE (Low Frequency Center component 1 Effect) component 1 **The letters in the program format display mean the following sound component: L: Front (left) R: Front (right) C: Center LS: Rear (left) RS: Rear (right) S: Rear (monaural): The rear component of the Dolby Surround processed signal and the Dolby Digital signal LFE: Low Frequency Effect signal z Hint For Dolby Digital and DTS, "LFE" is always enclosed in a solid line regardless of the LFE signal component being output. Note If "DTS" is set to "OFF" in "AUDIO SETUP" (page 73), the DTS track selection option will not appear on the screen even if the disc contains DTS tracks. TV Virtual Surround Settings (TVS) When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. This function is designed to work with the LINE OUT L/R (AUDIO) 1/2 jacks. Note that if you select one of the TVS settings, the player does not output the following signals from the DIGITAL OUT (COAXIAL or OPTICAL) jack. -Dolby Digital signals when you set "DOLBY DIGITAL" in "AUDIO SETUP" to "D-PCM" (page 73) 1 Press SUR during playback. The following display appears. TVS DYNAMIC 52