Sony DVP-NC85H Operating Instructions - Page 68
L1 - Settings for the Sound (AUDIO SETUP), AUDIO HDMI, AUDIO ATT attenuation
UPC - 027242689961
View all Sony DVP-NC85H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
◆ AUDIO (HDMI) Selects the type of audio signal output from the HDMI OUT jack. AUTO Normally, select this. Outputs audio signals according to the "DIGITAL OUT" settings (page 69). PCM Converts Dolby Digital, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM. Note A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and "AUTO" is selected. In this case, select "PCM." Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 63). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD AUDIO FILTER: SHARP DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF 48kHz/96kHz PCM: 48kHz/16bit ◆ AUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the LINE OUT L/R (AUDIO) jacks. OFF ON Normally, select this position. Select this when the playback sound from the speakers is distorted. ◆ AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-VR mode only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "AUDIO DRC." This function affects the output from the following jacks: - LINE OUT L/R (AUDIO) jacks - DIGITAL OUT (OPTICAL or COAXIAL)/ HDMI OUT jack only when "DOLBY DIGITAL" is set to "D-PCM" (page 70). STANDARD Normally select this position. TV MODE WIDE RANGE Makes low sounds clear even if you turn the volume down. Gives you the feeling of being at a live performance. 68