Sony DVP NS725P Operating Instructions - Page 47
To cancel the setting, Notes
UPC - 027242622463
View all Sony DVP NS725P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sound Adjustments To cancel the setting Select "OFF" in Step 2. ◆TVS DYNAMIC Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV ◆TVS WIDE Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV L R L: Front speaker (left) R: Front speaker (right) : Virtual speaker z Hints • You can select "TVS" by pressing the SURROUND button on the player. • You can also select "TVS" from the Control Menu (page 12). Notes • When the playing signal does not contain a signal for the rear speakers, the surround effects cannot be heard. • When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver). • Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. • Not all discs will respond to the "TVS NIGHT" function in the same way. ◆TVS NIGHT Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of "TVS WIDE" at low volume. ◆TVS STANDARD Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers. 47