Sony DVP-NS77H/S Operating Instructions - Page 57
L1 - Settings for the Display (SCREEN SETUP), TV TYPE, HDMI RESOLUTION, To reset the setting - 1080p
UPC - 027242708914
View all Sony DVP-NS77H/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Settings and Adjustments Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select "SCREEN SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 55). The default settings are underlined. SCREEN SETUP TV TYPE: 16:9 HDMI RESOLUTION: AUTO (1920×1080p) JPEG RESOLUTION: HD YCBCR/RGB (HDMI): YCBCR SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL ◆ TV TYPE Selects the aspect ratio of the connected TV (4:3 standard or wide). 16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 LETTER BOX Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 PAN SCAN Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 16:9 4:3 LETTER BOX 4:3 PAN SCAN Note Depending on the DVD, "4:3 LETTER BOX" may be selected automatically instead of "4:3 PAN SCAN" or vice versa. ◆ HDMI RESOLUTION Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (1920× 1080p) (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc. AUTO Normally, select this. (1920× 1080p) 1920× 1080i Sends 1920× 1080i video signals. 1280× 720p Sends 1280× 720p video signals. 720× 480p Sends 720× 480p video signals. To reset the setting If the picture does not appear normal or goes blank, press [/1 to turn off the player, and enter "369" using the number buttons on the remote, then press [/1 to turn on the player again. Notes • In case of "AUTO (1920× 1080p)," the player automatically adjusts the video signals that are suitable for the TV. Other cases, the player directly send the signal even if TV cannot accept. • When the HDMI indicator on the front panel lights up, images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are enlarged vertically. (Except when 720× 480p is selected). ◆ JPEG RESOLUTION Selects the type of JPEG resolution so that you can enjoy high picture quality via your HDMI connection. You cannot select this when "HDMI RESOLUTION" is set to "720× 480p" or "TV TYPE" is set to "4:3 LETTER BOX" or "4:3 PAN SCAN". ,continued 57US