Sony DVP-NS9100ES Operating Instructions - Page 27
Connecting to the 5.1ch input jacks, Connecting to a digital jack, the internal Dolby Digital, DTS
View all Sony DVP-NS9100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
D-1 : Connecting to the 5.1ch input jacks You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player. D-2 or D-3 : Connecting to a digital jack This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). z Hints • For correct speaker placement, refer to the instructions of the connected components. • To enhance the sound performance: -Use high-performance speakers. -Use front, rear, and center speakers of the same size and performance. -Place the subwoofer between the left and right front speakers. Notes • When the i.LINK indicator lights up, audio signals are output from the i.LINK S200 AUDIO jack, but not from any of the other jacks (including HDMI OUT). Video signals are output from the HDMI OUT jack. For connection D-2 or D-3 • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "DTS" in Quick Setup (page 33). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit" (page 82). • Super Audio CD audio signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack. • When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will need to do one of the following: -Connect the AV amplifier (receiver) to the TV with the HDMI cord. -Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord). • When the i.LINK indicator lights up, no signal is output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack. c continued 27 Hookups