Sony DVP-NS9100ES Operating Instructions - Page 85

Adjusting the speaker volume, and level, Select TEST TONE and set to OFF

Get Sony DVP-NS9100ES - Cd/dvd Player PDF manuals and user guides View all Sony DVP-NS9100ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

◆ LEVEL (REAR) Varies the level of the rear speakers. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. L (0 dB) Set this between -12 dB and 0 dB in 0.5 dB increments. R (0 dB) Set this between -12 dB and 0 dB in 0.5 dB increments. To adjust the volume of all the speakers at one time Use the amplifier's (receiver's) volume control. ◆ TEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust "LEVEL." OFF The test tone is not emitted from the speakers. ON The test tone is emitted from each speaker in sequence. Adjusting the speaker volume and level 1 Select "SPEAKER SETUP" in the Setup Display. 2 Select "TEST TONE" and set to "ON." You will hear the test tone from each speaker in sequence. 3 From your listening position, select "LEVEL (FRONT)" or "LEVEL (REAR)" and adjust the value using X/x. 4 Select "TEST TONE" and set to "OFF" to turn off the test tone. Note The test tone signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT/ i.LINK S200 (AUDIO) jack. Settings and Adjustments 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
85
Settings and Adjustments
◆
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at
one time
Use the amplifier’s (receiver’s) volume
control.
◆
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust “LEVEL.”
Adjusting the speaker volume
and level
1
Select “SPEAKER SETUP” in the Setup
Display.
2
Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
“LEVEL (FRONT)” or “LEVEL (REAR)”
and adjust the value using
X
/
x
.
4
Select “TEST TONE” and set to “OFF”
to turn off the test tone.
Note
The test tone signals are not output from the
DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI
OUT/ i.LINK S200 (AUDIO) jack.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence.