Sony DVWM2000P Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 122
Items in the Extended Setup Menu
View all Sony DVWM2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 12 Setup Menus 121-42-4ItemsItienmthesEixntetnhdeedESextutepnMdeneud Setup Menu The extended setup menu contains the following items. In the "Settings" column of the table, the factory default settings are indicated by an enclosing box. Menu items in the range 100 to 199, relating to the control panels Item number Item name Settings 101 SELECTION FOR Select how the unit enters the search mode. SEARCH DIAL ENABLE DIAL : Turning the search dial switches to search mode at all times except during recording/editing. KEY: One of the JOG, SHUTTLE, and VAR buttons must be pressed to switch to search mode. 102 MAXIMUM SPEED Select the fast forward and rewind tape speed and also search mode speed during tape playback. MAX : Perform fast forward, rewind, and search mode playback at the maximum speeds. MX/24: Perform fast forward and rewind at the maximum speeds, and search mode playback at up to 24 times normal speed. ×24: Perform fast forward and rewind at 24 times normal speed, and search mode playback at up to 24 times normal speed. Maximum fast forward, rewind, and search mode speeds • Analog cassette: 35 times (525-line mode) or 42 times (625-line mode) normal speed. • Betacam SX/MPEG IMX cassettes: 60 times normal speed (525-line mode) or 78 times (625-line mode) • Digital Betacam cassette: 50 times normal speed 103 AUDIO SELECTED LINE Select the output signal to the MONITOR OUTPUT connectors during playback of OUT (DVW-M2000/ analog Betacam-format tape. M2000P only) MANU : Output the signals selected by the audio signal selection buttons on the lower control panel. AUTO1: Output stereo, using the AFM channels (3 and 4) for playback from metal tape, and the LNG channels (1 and 2) for playback from oxide tape. AUTO2: Output the signals selected by the audio signal selection buttons on the lower control panel, but during variable speed playback, if AFM is selected, automatically switch to LNG. 104 AUDIO MUTING TIME Select the length of time for which audio muting occurs when the unit switches to playback either from stopped or from still playback in the search mode. OFF : Set the audio muting time to zero (i.e. no muting). 0.1S ... 1.0S: Set the audio muting time from 0.1 second to 1.0 second, in 0.1- second increments. 105 REFERENCE SYSTEM Select whether or not to display a warning when the video/audio reference signal ALARM selected by the function menu item OUTREF, is not supplied or is out of phase with the input video signal. OFF: No warning. ON : Flash the STOP button as a warning. 106 CAPSTAN LOCK Select the capstan servo lock mode. PANEL : The capstan servo lock mode is determined by the function menu item CAPSTN. 2F: The capstan servo locks every two fields regardless of the setting of the function menu item CAPSTN. 4F: The capstan servo locks every four fields regardless of the setting of the function menu item CAPSTN. 8F (for DVW-M2000P/2000P): The capstan servo locks every eight fields regardless of the setting of the function menu item CAPSTN. (Continued) 12-8 Chapter 12 Setup Menus